Popcorn Ceiling Removal in Meridian, ID

A Meridian ceiling may look dated, show patched spots, or shed texture when someone bumps it. We take the popcorn off, repair what is underneath, and leave a ceiling ready for paint or a new texture.

For popcorn ceiling removal, we cover the room, wet the texture in sections, and scrape it down to the drywall. Some ceilings come off clean. Others show torn paper, loose tape, or nail pops once the texture is gone.

When the board needs work, we handle popcorn removal with drywall repair. We retape loose joints, set screws, cut out water-damaged sections, and patch them flush. Then we skim coat the ceiling so seams and patches do not show through the finish.

With popcorn removal with painting and finishing, we prime the bare surface and paint it. If you want texture back instead of a smooth ceiling, we offer texture matching and retexturing. If you only need one damaged spot fixed, our ceiling repair work covers cracks, holes, and stains without stripping the whole room.

Meridian grew fast. The 2010s are among the leading decades for homes built here, and those newer houses usually have a different ceiling finish than older ones. Old Town is the historic downtown, laid out along the city's original plat lines, and homes in and around it are more likely to carry older sprayed acoustic texture. A ceiling in a newer subdivision and a ceiling near Old Town are rarely the same job. We check the build year and call for testing by a separate qualified professional when the age of the texture is in question.

If a sample tests positive for asbestos, we do not scrape that ceiling until the material is handled under asbestos rules. Asbestos waste going to the county landfill must be double bagged, each bag at least 6 mil thick, and sealed. Separate qualified professionals handle that material, not our crew. We tell you the test result before we schedule removal.

The Treasure Valley is semi-arid with fairly mild winters. Dry air pulls water out of the texture fast. We wet small sections at a time so the popcorn stays soft while we scrape and does not turn to dust. The same dry air speeds up how fast joint compound dries. We check each skim coat before sanding, because a coat that looks dry on the surface can still be soft at the patches.

Homes in Meridian are mostly detached houses. In those, we seal off each room with plastic sheeting, cover the floors, and shut down the air handler so dust stays put. In a townhome or condo, we coordinate with the association or manager on work hours, parking, and where debris goes out.

We work across the city, from Settlers Park on N. Meridian Rd. to Storey Park on E. Franklin Rd. and the neighborhoods around Kleiner Park. Eagle Road is the busiest non-interstate highway in Idaho, and an auxiliary lane is planned on I-84 between the Meridian Road and Eagle Road interchanges. We time our arrival around that traffic so ladders, plastic, and drywall tools are unloaded and the room is covered before the work day gets going.

We start with a surface assessment. We look at the texture, press on soft spots, check for stains, and note loose tape and cracks. We check the build year and call for testing by a separate qualified professional if the texture could be original. Then we write down the removal, repair, and finish the ceiling needs.

On removal day, we move or cover furniture and cover the floors. We hang plastic on the walls, cover vents and fixtures, and seal doorways. We turn off the HVAC system for the rooms we are working in.

We mist the texture in sections, let it soak, and scrape it off with wide blades. We bag the debris as we go. Once the ceiling is bare, we inspect the drywall again. Removal shows damage that the texture hid, and we fix it before any finish goes on.

For drywall repair, we reset fasteners, retape lifted seams, and patch holes and water damage. We skim coat the full ceiling so the surface reads as one plane. We sand between coats and check the ceiling under a work light from a low angle. That light shows ridges and seams that ordinary room light misses.

For the finish, we prime the bare drywall first. Then we paint a smooth ceiling or spray a new texture, matched to the rest of the house if you want it to blend. We pull the plastic, clean up, and walk the room with you.

Does my ceiling need asbestos testing?

If the texture could be original to an older home, yes. A separate qualified professional tests it before we scrape. Most houses built in Meridian's newer subdivisions have a different ceiling finish, and we check the build year to decide whether a sample is needed.

Can you make a repaired spot match the rest of the ceiling?

Yes. We feather the repair into the surrounding surface, skim coat it, and then match the texture or paint. A patch that is only painted over will still show, so we rebuild the surface first.

How long does a room take?

Drywall condition and drying time between coats set how long a room takes. Drywall damage, extra skim coats, and painting add time. We give you a schedule after we see the ceiling.

What affects the price?

Ceiling area, height, how hard the texture comes off, drywall damage, the number of skim coats, and the finish you choose all change the price. Our finish cost guide breaks down each part. You can also read our room preparation guide to see what we cover and what to move before we arrive.

Call (208) 907-9060 or request an estimate for popcorn ceiling removal in Meridian. Tell us which rooms you want done and whether you see stains, cracks, or seams. We will inspect the ceiling, tell you if its age calls for separate testing, and put the recommended work in writing.